Hardness requirements

Blade blade hardness is not less than HRC53.

Bolt, pressure plate, central axis hardness HRC33 - 40.

surface quality

There should be no cracks, corrosion and harmful scars, burr and other defects on the surface of the parts.

Whenever parts surface treatment, shall be uniform color, no obvious spot scars and pits, omissions, bubble, delamination and flow marks.

The blade edge of the two surface roughness Ra is not greater than 3.2um, the remaining cutting edge of the blade surface roughness Ra

Not more than 6.3um.

1 by the quality scissors head made of spring steel, high hardness and toughness, hardness can be cut with 2 materials

2 sharp edges, wear resistance, small shear resistance

3 high strength solid bolts, with anti loose nut, all through special heat treatment

The 4 handle chooses DuPont material as the coating, the color is bright, durable

5 the handle is tightly matched with the scissors head body, and the handle is firm and reliable.

6.PVC feel comfortable grip

Characteristic：

1, forging products

2, the small wire of a special tool, the spring is attached with one hand can easily cut off.

3, blade forging special steel, because it is the lock mechanism, the use of safe, easy to carry.

4, cut off the material object: low carbon steel wire hardness HRB80